Seat Leon >> Description of work
SEAT Leon Service and Repair Manual / Maintenance / Description of work
- Tasks to be completed on the vehicle interior
- Tasks to be completed on the vehicle exterior
- Documentation
- Lower engine noise insulation: removing and fitting
- Seat belts: testing
- Windscreen wiper/washer system and headlight cleaning system: checking
- Passenger's airbag: Check key switch and "ON / OFF" function
- Initialise power windows (activate)
- Check vehicle key operation
- Clock and date: Setting to correct time
- Tyre pressure control system: carry out basic adjustments
- Connecting vehicle diagnosis and service information system
- Error memory on all systems: interrogating
- Configure and check the Bluetooth connection between the customer's mobile telephone and the vehicle's hand-free system
- Service interval display: Reset
- Service interval indicator: Adjust the programming
- Transport mode, factory mode and production mode: deactivate using the vehicle diagnostic and service information system
- Panorama roof: check operation, clean drains and lubricate guides
- Battery: Check the battery terminals for correct fit by hand
- Check battery with the battery tester - VAS 6161-
- Engine and engine compartment components: check for leaks and damage
- Coolant level and anti-freeze in cooling system: checking
- Air filter: Clean housing and renew filter element
- Spark plugs: replace
- Diesel fuel filter: Drain
- Diesel fuel filter: Replace
- Dust and pollen filter for passenger compartment: replace
- Notched belt for camshaft drive: Check
- Coolant pump toothed belt: Check
- Poly-V belt: check condition
- Transportation devices: remove blocking pieces from front axle springs
- Engine oil and oil filter: replace
- Replenishing engine oil
- Engine oil standards
- Engine oil: checking levels
- Multi-purpose additive for petrol fuels: add
- Thickness of brake pads and condition of brake discs, front and rear: Check
- Drive shaft dust cover: Visual inspection for damage
- Self-aligning bearing and rubber bearing of the roller rocker arms: Visual inspection for damage
- Front differential lock: change oil
- All-wheel drive coupling: Change oil
- Tyres, including spare tyre: check condition, tread, inflation pressure, depth of tyre tread
- Wheel securing bolts: Tighten to specified torque
- Brake fluid level according to wear of pads: check
- Brake fluid and clutch: Renew
- Headlights - check adjustment
- Particulate filter: checking
- Raise vehicle with lifting platforms or trolley jack
- Towing and being towed
- Type plate
- Vehicle identification number
- Engine code and engine number
- Biodiesel
- Natural gas system: Visual inspection of the natural gas tank for corrosion and implementation of a leakage test
- Check condition of sealing cap and natural gas filler connection, clean if necessary and check seal
- Full Link connection process
- Exhaust emissions test
Service tables for market group B and C
Since in several markets there are market-specific service specifications,
the latter are listed as time or mileage dependent
additional work and are grouped by the respective market group.
NOTICE
...
Tasks to be completed on the vehicle
interior
The vehicle is supplied from factory equipped with a series of
protective covers fitted on the inside of the vehicle. These elements
serve to protect the components and frames inside the
vehicle du ...
See also:
Brief introduction
Why wear a seat belt and assume the correct sitting
position?
For the inflating airbags to achieve the best protection, the
seat belt must always be worn properly and the correct sitting
position ...
