Seat Leon >> Service interval indicator: Adjust the programming

SEAT Leon Service and Repair Manual / Maintenance / Description of work / Service interval indicator: Adjust the programming

NOTICE Vehicles with PR number "QI6" are equipped with activated Longlife Service (flexible service intervals) ex-factory, it is however possible, to modify the programming to time or distance dependent service (fixed service interval).

Vehicles with PR numbers "QI1/QI2/QI3/QI4/QI7" are activated with time or distance dependent service ex-factory (fixed service interval). It is not possible to modify the programming with these vehicles.

The programming of the service interval indicator must be changed for the handing-over inspection as well as for each service.

Special tools and workshop equipment required

  • Vehicle diagnosis tester

NOTICE If no indications are displayed on the screen during these operations: - operating instructions vehicle diagnosis tester .

Recoding from flexible to fixed intervals

ODIS Service

  • Connecting diagnosis tester.
  • Switch on the ignition.
  • Carry out identification of vehicle.
  • Deselect "Using guided fault finding".
  • Select "Control unit".
  • Select "instrument cluster".
  • Select "Identify control unit".
  • Select "Guided Functions".
  • Select "change flexible/fixed intervals".
  • Carry out the reading according to the details in the "Guided Functions".

 

  • Switch off the ignition and the vehicle diagnostic and service information system .

NOTICE The vehicle diagnostic and service information system could have to remain connected for different tests.

Changing values for maximum distance to be driven (km) until next oil change service (fixed) during delivery inspection

ODIS Service

  • Connecting diagnosis tester.
  • Switch on the ignition.
  • Carry out identification of vehicle.
  • Enter task data or select "Without order".
  • Select "Control unit".
  • Select "instrument cluster".
  • Select "Guided Functions".
  • Select "Oil change service (fixed)".
  • Follow instructions on vehicle diagnostic tester in "Guided functions" mode.
  • Reset "-1- Oil change service (fixed)".
  • Follow instructions on vehicle diagnostic tester in "Guided functions" mode.

The current maximum km values are displayed in the vehicle diagnostic and service information system .

  • Select "No".
  • Select value for maximum distance to be driven until next oil change service, according to specifications valid in your country.
  • Carry out adaption according to the information of "Guided Functions".

 

  • Switch off the ignition and the vehicle diagnostic and service information system .

NOTICE The vehicle diagnostic and service information system could have to remain connected for different tests.

    Service interval display: Reset
    NOTICE The service interval indicator must be reset for the handing-over inspection as well as for each service. For the handing-over inspection, the "oil change indicator" as well as the "inspe ...

    Transport mode, factory mode and production mode: deactivate using the vehicle diagnostic and service information system
    NOTICE This model has no "factory mode". The transportation mode is responsible for assuring the starting capability of vehicle. Battery discharging is reduced by the transportation mode, beca ...

    See also:

    Removing and installing sunroof roller blind
    Removing Remove the cover of the roller blind . Move the slides into the closed roof position.   On both sides loosen the screws -1- of the bracket -2-. Lift sunroof sun blin ...