Seat Leon >> Removing and installing door seal (outer)
SEAT Leon Service and Repair Manual / General body repairs, exterior / Front doors, door components, central locking / Door / Removing and installing door seal (outer)
Removing and installing door outer seal, 4-door model

Removing
- Pull door seal -1- off door -2- together with the clips -3-.
fitting
- Check clips -3- for damage and renew if necessary.
- Press door seal -1- on door -2- together with the clips -3-.
The clips -3- need to be pressed in until stop.
Removing and installing door outer seal, 2-door model

Removing
- Pull door seal -1- off door -2- together with the clips -3-.
fitting
- Check clips -3- for damage and renew if necessary.
- Press door seal -1- on door -2- together with the clips -3-.
The clips -3- need to be pressed in until stop
Removing and installing inner door seal
Seal for front door: remove
Front door seal: Fitting
Special tools and workshop equipment required
Release lever - U 30800-
Thrust piece - T20098-
Remove front door seal
Note
The ...
Removing and installing door
Special tools and workshop equipment required
Torque wrench - V.A.G 1331-
Note
The sequences below describe the processes for removal and
installation for the left side of the vehicle. The ...
See also:
Correct sitting position for passengers in the rear seats
Passengers in the rear seats must sit up straight, keep their
feet in the foot wells and wear their seat belts properly.
To reduce the risk of injury in the event of a sudden braking
manoeuvre or a ...
