Seat Leon >> Error memory on all systems: interrogating
Special tools and workshop equipment required
- Vehicle diagnosis tester
Work sequence
NOTICE If no indications are displayed on the screen during these operations.
ODIS Service
- Connecting diagnosis tester
- Switch on the ignition.
- Carry out identification of vehicle.
- Enter task data or select "Without order".
- Select "Control unit".
- Select "Event memory list".
- Repair all faults according to repair guidelines.
| WARNING The vehicle must always be delivered to the customer with fault memory cleared. |
Static faults
If one or more static faults are found in the fault memory, it is recommended, in agreement with the customer, to rectify these faults using Guided Fault Finding.
Sporadic faults
If only sporadic faults or notes are stored in the event memory and the customer has no complaints regarding the electronic vehicle system, erase event memory.
Connecting vehicle diagnosis and service
information system
Special tools and workshop equipment required
Vehicle diagnosis tester
NOTICE
It must be ensured that the selected vehicle diagnostic and
service information system is only used with the asso ...
Configure and check the Bluetooth connection
between the customer's mobile
telephone and the vehicle's hand-free system
It is necessary to configure the Bluetooth connection between the
mobile telephone and the hands-free system before it can be
used for the first time.
Certain software versions may not operate er ...
See also:
Disposal
Releasing gas and draining gas-filled
shock absorbers (front)
Releasing gas from front gas-filled
shock absorber and draining (conventional
suspension)
Clamp gas-filled shock absorber vertical ...
