Operating conditions

The speed warning function provides active alerts whenever your Seat Leon travels at speeds exceeding 20 km/h.

Connection and disconnection

Depending on regional market regulations, the speed warning function is automatically activated every time the ignition is switched on.

If desired, you can manually deactivate the speed warning feature through the central infotainment system:

1. Open the Assistance systems menu on the touchscreen display.

2. Switch the speed warning on or off in the designated submenu.

OR: deactivate it directly from the multifunction steering wheel controls:

1. Open the driver assistants menu by pressing button .

2. Highlight and switch off the Speed warning option.

Activating and deactivating the audible warning

Within the central infotainment system:

1. Open the Assistance systems menu on the display.

2. Access the Speed Warning configuration menu.

3. Enable or disable the audible chime using the corresponding option checkbox.

Note The audible warning chime defaults to activated whenever the ignition is switched on.

Adjusting the warning thresholds

You can manually adjust the sensitivity and warning thresholds of the speed warning function to align with your driving style.

In the infotainment system interface:

1. Open the Assistance systems menu.

2. Access the Speed Warning settings.

3. To configure the desired warning threshold level, tap within the Overtaking warning menu option.

Note Whenever the vehicle ignition is switched on, all speed warning thresholds automatically reset to factory default values.

Activation and deactivation of the speed change warning tone

The speed change warning tone provides an acoustic notification whenever a change in detected speed limits occurs along your route. You can manually disable this acoustic tone if preferred.

Using the central infotainment system:

1. Open the Assistance systems menu.

2. Open the Speed Warning menu.

3. Activate or deactivate the speed change tone using the dedicated toggle option.

Concealing fault messages via the multifunction steering wheel

1. Press the button on the right cluster of the multifunction steering wheel to clear active alerts from the display.

Trailer mode

For vehicles equipped with a factory-installed towbar and a trailer connected via the trailer socket, the recognition of trailer-specific traffic signs—such as dedicated towing speed restrictions and overtaking bans—can be enabled or disabled within the vehicle settings menu of your Seat Leon.

When operating in trailer mode, maximum recognized speed limits can be customized to match your trailer category and country-specific legal speed regulations.

In the infotainment system menu:

1. Open the Assistance systems menu.

2. Access Trailer detection settings.

3. To tailor the warning threshold for trailer towing, tap within the Overtaking warning menu item.