Fitting control unit to hydraulic unit

Special tools and workshop equipment required Torque screwdriver - VAG 1624- ESD workplace - VAS 6613- Torx socket T25 Clean sealing surface on hydraulic unit -2- using pla ...

Assembly overview - speed sensor on front axle

- Speed sensor Front right speed sensor - G45- / rear left speed sensor - G46- Before installing the speed sensor, apply lubricating paste all around - Electronic parts ca ...

See also:

Assembly overview - front brake caliper
Exploded view - brake calliper FS III - Protective cap Fit onto bleeder valve. - Bleeder screw Before inserting, lightly grease the thread with assembly paste G 052 150 A2 ...