Seat Leon >> Transport mode, factory mode and production mode: deactivate using the vehicle diagnostic and service information system

SEAT Leon Service and Repair Manual / Maintenance / Description of work / Transport mode, factory mode and production mode: deactivate using the vehicle diagnostic and service information system

NOTICE This model has no "factory mode".

The transportation mode is responsible for assuring the starting capability of vehicle.

Battery discharging is reduced by the transportation mode, because electrical consumers are switched off.

All vehicle functions which are not necessarily used during vehicle transportation and require no-load voltage or battery capacity are switched off with the activated transportation mode, with regard to the service life of battery.

These are especially all functions in the vehicle which can reduce the battery capacity when being misused.

Examples are radios, electronically operated flaps and attachments and anti-theft alarm systems which can produce faults during transportation.

Special tools and workshop equipment required

  • Vehicle diagnosis tester

Work sequence

NOTICE If no indications are displayed on the screen during these operations: - operating instructions vehicle diagnosis tester .

ODIS Service

  • Connecting diagnosis tester.
  • Switch on the ignition.
  • Carry out identification of vehicle.
  • Select "Without order".
  • Select "Test schedule".
  • Select "Select own test".
  • Select "Delivery Inspection".
  • Select "Data bus diagnostic interface - J533".
  • Follow instructions on vehicle diagnostic tester in "Guided functions" mode.

 

  • Switch off the ignition and the vehicle diagnostic and service information system .

NOTICE The vehicle diagnostic and service information system could have to remain connected for different tests.

    Service interval indicator: Adjust the programming
    NOTICE Vehicles with PR number "QI6" are equipped with activated Longlife Service (flexible service intervals) ex-factory, it is however possible, to modify the programming to time or distance dep ...

    See also:

    Wheel alignment procedure
    Overview - wheel alignment procedure Note The vehicle must always be in unladen condition when measuring wheel alignment. Operations should be carried out in the order shown! - Drive vehicle o ...