Seat Leon >> Overview of fitting locations - central locking system

Overview of fitting locations - central locking system (part I)

Front doors, door components, central locking

  1. - Sliding sunroof adjustment control unit - J245-
    • The sliding sunroof control unit - J245- is integrated in the sliding sunroof motor - V1-
  2. - Tank filler flap locking motor - V155-
  3. - Coupling station
    • 2 off
    • Installation location: upper part of tailgate
  4. - Rear lid handle release button - E234-
  5. - Lock unit for tailgate - F256-
    • The lock unit on the boot/tailgate - F256- in built into the unlocking motor for boot/tailgate - V139-
  6. - Coupling station
    • Only for the five-door model
    • Installation location: B-pillar, left side
  7. - Switch module, window regulators for front door (driver's side)
    • The window winder control unit, driver side includes the following electrical components:
  • Central switch for window regulators in driver door - E189-
  • Button for window regulator, front driver's side - E710-
  • Rear driver side window regulator button - E711-
  • Button for window regulator, rear passenger side - E713-
  • Button for window regulator, rear driver side - E716-
  • Button illumination bulb - L76-
    • Installation and removal; installing and removing the window control switch unit in the driver's side door E512
  1. - Coupling station
    • Installation location: A-pillar, left side
  2. - Control unit for the onboard network - J519-
    • The on board network control unit - J519- is found on the driver's side, behind the relay carrier.
    • The Data bus diagnosis interface - J533- is incorporated in the On board control unit - J519- .
    • Installation and removal; installing and removing onboard network control J519
  3. - Alarm horn - H12-
    • Fitting location: in plenum chamber
    • Installation and removal; Horn; high tone horn H2 / low tone horn H7: install and remove .
  4. - Coupling station
    • Installation location: A-pillar, passenger side
  5. - Coupling station
    • Only for the five-door model
    • Installation location: B-pillar, passenger side

Overview of fitting locations - central locking system (part II)

Front doors, door components, central locking

  1. - Control unit on front door (passenger side)
    • Door control unit, passenger side - J387-
  2. - Motor on window regulator, front door (passenger side)
    • Motor for window regulator, passenger side - V148-
    • Removing and fitting
  3. - Door lock on front door (passenger door)
    • The door lock assembly includes the following electrical components:
  • Passenger door contact switch - F3-
  • Central locking lock unit, passenger side - F221-
  • Central locking unit motor, passenger door - V57-
  • Central locking unit motor (Safe), passenger door - V162-
    • Removing and fitting
  1. - Motor on window regulator, back door (passenger side)
    • Motor for window regulator, rear passenger side - V472-
    • Only for the five-door model
    • Removing and fitting
  2. - Door lock on back door (passenger door)
    • Only for the five-door model
    • The door lock assembly includes the following electrical components:
  • Rear door contact switch, passenger side - F506-
  • Locking unit for central locking at back (passenger side) - F436-
  • Motor for SAFE function of the rear central locking (passenger side) - V538-
  • Motor for central locking at back (passenger side) - V540-
  1. - Door lock on back door (passenger side)
    • Only for the five-door model
    • The door lock assembly includes the following electrical components:
  • Rear door contact switch, driver side - F505-
  • Locking unit for central locking at back (driver side) - F435-
  • Motor for SAFE function of the rear central locking (driver side) - V537-
  • Motor for central locking at back (driver side) - V539-
  1. - Motor on window regulator, rear door (driver's side)
    • Motor for window regulator, rear driver side - V471-
    • Only for the five-door model
    • Removing and fitting
  2. - Door lock unit on front door (driver's side)
    • The door lock assembly includes the following electrical components:
  • Driver door contact switch - F2-
  • Central locking lock unit, driver side - F220-
  • Central locking unit motor, driver door - V56-
  • Central locking unit motor (Safe), driver door - V161-
  • Contact switch in lock cylinder on driver's side - F241-
  1. - Motor on window regulator, front door (driver's side)
    • Window regulator motor driver side - V147-
    • Removing and fitting
  2. - Control unit on front door (driver's side)
    • Driver door control unit - J386-
  3. - Contact switch for bonnet - F266-
    • Installation location: on the lock carrier plate
    • Remove the lock from the front bonnet
  4. - Switch module
    • The switch module on the central console includes the following components, depending on the versions:
  • Door locking
  • Door unlocking
  • Hazard warning lights switch
  • ESP disconnection button
  • SET button (to indicate tyre incidents)
  • Heated rear window button - E230-
  • Heated driver seat regulator - E94-
  • "AIRBAG OFF" warning lamp
  • Passenger heated seat regulator - E95-
  • AUX key
    • Removal and installation; Removal and installation of buttons in the switch panel
    Removing and installing driver door control unit - J386- and front passenger door control unit - J387-
    Removing Removing interior trim of front door: Front door trim: removing and installation; front door trim: removing and installation. Unplug electrical connectors -2 and 3-; to do so, pull lo ...

    See also:

    Removing and installing coolant pipes on heat exchanger
    Removing and installing coolant pipes at heat exchanger (Valeo) Note There are different designs and makes of heater and air conditioning unit. The individual components of the various heaters and ...