Cable for the outside handle (front door): Removing.

Cable for the outside handle (front door): Fitting.

Cable for the outside handle (front door): Removing

• Move door window to "closed" position.
• Remove the interior protection cover.

Door lock side

Note Take particular care not to damage the retaining clip of the cover.

• If fitted, remove the cover -1- by clipping it out in the direction of -arrow a- and then move in the direction of -arrow b-.

• Turn the cable on lever -3- 90º in direction of -arrow a- and take it out of cable support bracket -2-.
• Turn the cable in lever -1- in the direction of -arrow b-.
• The cable must form a line with the recess in the lever.
• Detach the cable from the lever -1-.

Side with the mount of the outside handle

• Have a second fitter move and hold the outside door handle in the "open" position.

• Release securing tabs -3-.
• Remove the housing -4- together with the actuating cable from its support -Arrow b-.
• Move exterior door handle to "closed" position.
• Loosen the cable -2- in the control lever -1- in the direction of -arrow A- as shown in the picture.

Cable for the outside handle (front door): Fitting

Fit in reverse order from removal, remembering the following:

Removing and installing the cable for the inside handle (front door)

Removing

• Driver side: Remove lock cylinder

Inside handle side

• Remove cable -4- on the -interior of the- handle; Front door trim; installation and removal of the front door trim .

Door lock side

• Remove the cable -4- of the -door lock side-.

fitting

Fit in reverse order from removal, remembering the following: