Seat Leon >> Removing and installing door seal (outer)

Removing and installing door outer seal, 4-door model

Front doors, door components, central locking

Removing

  • Pull door seal -1- off door -2- together with the clips -3-.

fitting

  • Check clips -3- for damage and renew if necessary.
  • Press door seal -1- on door -2- together with the clips -3-.

The clips -3- need to be pressed in until stop.

Removing and installing door outer seal, 2-door model

Front doors, door components, central locking

Removing

  • Pull door seal -1- off door -2- together with the clips -3-.

fitting

  • Check clips -3- for damage and renew if necessary.
  • Press door seal -1- on door -2- together with the clips -3-.

The clips -3- need to be pressed in until stop

    Removing and installing inner door seal
    Seal for front door: remove Front door seal: Fitting Special tools and workshop equipment required Release lever - U 30800- Thrust piece - T20098- Remove front door seal Note The ...

    Removing and installing door
    Special tools and workshop equipment required Torque wrench - V.A.G 1331- Note The sequences below describe the processes for removal and installation for the left side of the vehicle. The ...

    See also:

    Emergency opening
    This allows the vehicle to be opened if the central locking does not operate (for example if the battery is flat) Fig. 67 Tailgate: emergency opening There is a groove in the boot allowing acces ...