Separation element: removing and installing

Special tools and workshop equipment required Release lever - 3409- Removing Note The sequences below describe the processes for removal and installation for the left side of the vehicle. ...

Exploded view - plenum chamber partition panel

- Separator Left and right hand side Secure the retaining clip of the body Note If one of the clips are damaged, the filling piece must be replaced with a new one. - Reta ...

See also:

Closing the bonnet
– Raise the bonnet slightly. – Release the bonnet stay and replace it in its support. – At a height of about 30 cm let it fall so it is locked. If the bonnet does not close, do not press down ...