Repairing the puncture

To repair the puncture, once the preliminary tasks are done, follow these steps. Apply the sealant – The instructions for using the sealant correctly are on the packaging Inflate the tyres. – ...

Changing a fuse

If a fuse has blown it must be replaced Fig. 160 Left side of dash panel: Fuse box cover Fig. 161 Fuse box cover in engine compartment Fuse cover underneath the steering wheel – Switch off ...

See also:

Fitting control unit to hydraulic unit
Special tools and workshop equipment required Torque screwdriver - VAG 1624- ESD workplace - VAS 6613- Torx socket T25 Clean sealing surface on hydraulic unit -2- using pla ...