Seat Leon >> Anti-theft wheel bolts

Anti-theft wheel bolts

Fig. 159 Anti-theft wheel

Fig. 159 Anti-theft wheel bolt

– Insert the adapter onto the wheel bolt and push it on as far as it will go fig. 159.
– Fit the box spanner as far as it will go over the adapter.
– Loosen or tighten the wheel bolt as appropriate.

Code number
 The code number of the anti-theft wheel bolt is stamped on the front of the adapter.

The code number should be noted and kept in a safe place, as it is only by using the code number that a duplicate adapter can be obtained from an Authorised Service Centre.

    Removing and fitting the wheel
    For removing and fitting the wheel, the following tasksmust be completed. Fig. 158 Wheel change: Hexagon socket in screwdriver handle to turn the wheel bolts after they have been loosened Cha ...

    Tyres with directional tread pattern
    Tyres with directional tread pattern must be fitted so that they rotate in the correct direction. A directional tread pattern can be identified by arrows on the sidewall that point in the direction ...

    See also:

    Removing and installing inner door seal
    Seal for front door: remove Front door seal: Fitting Special tools and workshop equipment required Release lever - U 30800- Thrust piece - T20098- Remove front door seal Note The ...