Seat Leon >> Changing a wheel

Change the wheel as described below

– Pull off the hub cap. See  fig. 154.
– Slacken the wheel bolts
– Raise the car with the jack in the corresponding zone
– Take off the wheel and then put on the spare wheel
– Lower the vehicle.
– Tighten the wheel bolts firmly in diagonal sequence with the box spanner
– Replace the hub cap.

    Preparation work
    What you must do before changing a wheel. – If you have a flat tyre or puncture, park the vehicle as far away from the flow of traffic as possible. Choose a location that is as level as possible. ...

    After changing a wheel
    After changing the wheel there are still tasks to complete. – Put the tools and jack back in the luggage compartment. – Place the wheel with the defective tyre in the luggage compartment and se ...

    See also:

    Tyre service life
    The service life of tyres is dependent on tyre pressure, driving style and fitting. Fig. 151 Tyre tread wear indicators Fig. 151 Tyre tread wear indicators Wear indicators The original tyre ...