Seat Leon >> Rain sensor*

The rain sensor controls the frequency of the windscreen wiper intervals, depending on the amount of rain.

Fig. 82 Rain sensor*

Fig. 82 Rain sensor*

Fig. 83 Windscreen wiper

Fig. 83 Windscreen wiper lever

Switching on the rain sensor
 – Move the windscreen wiper lever into position 1 fig. 83.
– Move the control A to the left or right to set the sensitivity of the rain sensor. Switch to the right - high sensitivity. Switch to the left - low sensitivity

The rain sensor is part of the interval wipe function. You will have to switch the rain sensor back on if you switch off the ignition. This is done by switching the wiper intermittent function off and back on.

Note
 • Do not put stickers on the windscreen in front of the sensor. This may cause sensor disruption or faults.

    Front windscreen wipers
    The windscreen wiper lever controls the windscreen wipers and the automatic wash and wipe. Fig. 81 Windscreen wiper and windscreen wash lever The windscreen wiper lever  fig. 81 has the fo ...

    Rear window wiper
    The windscreen wiper lever operates the windscreen wiper and the wash and wipe system for the rear window. Fig. 84 Window wash and wipe lever: Rear window wiper Switching on the interval wipe ...

    See also:

    Adjusting set speed*
    The speed can be altered without touching the accelerator or the brake. Fig. 127 Turn signal and main beam lever: switch and rocker switch for CCS Setting a higher speed – Press the upper pa ...