Seat Leon >> Installing to engine and gearbox support

Special tools and workshop equipment required

  • Engine and gearbox support - VW 540-

Controls, housing

  • Adapter - T10235-

Controls, housing

  • Clamping frame - VW 313-

Controls, housing

  • Secure gearbox to engine and gearbox support - VW 540- -arrows-.

Gear oil

Checking gear oil level

Special tools and workshop equipment required

  • Socket bit - 3357- for oil filler plug with multi-point socket head bolt

Controls, housing

  • Torque wrenches - V.A.G 1331-

Controls, housing

Gearbox oil - Electronic parts catalogue (ETKA)

  • Remove noise insulation.
  • To check gear oil, remove oil plug -arrow-.

The gearbox oil level is correct if the box is full up to the lower edge on the filling hole.

  • If necessary, fill with gear oil to lower edge of filler hole.
  • Tighten bolt -arrow-.

Various versions of oil filler and drain plugs

I - Oil filler or oil drain plug with multi-point socket head, 25 Nm
II - Oil filler or oil drain plug with hexagon socket head, 30 Nm

  • Install noise insulation .

    Gearbox housing, clutch housing
    Assembly overview - clutch housing - Conical bolt Tightening torque - Flanged shaft with pressure spring Removing and installing Assembly - Bolt Must be renewed if ...

    See also:

    Instrument cluster
    Installing and removing the KX2 dashboard instrument cluster Special tools and workshop equipment required Lever for the front-end - 3370- Note All control lights in the dashboard instr ...