Seat Leon >> Removing and installing brake splash plate

SEAT Leon Service and Repair Manual / Brake system / Brakes - mechanism / Front brakes / Removing and installing brake splash plate

Removing:

  • Dismantle brake disc.
  • Unscrew screws -arrows- of splash plate -1-.
  • Remove splash plate -1- from the wheel hub.

Installation:

  • Clean wheel hub and splash plate.
  • Fit splash plate onto wheel hub.

Brakes - mechanism

Caution

Use new bolts.
  • Screw in bolts -arrows-.
WARNING

Firmly depress the brake pedal several times with the vehicle stationary, so that the brake pads are properly seated in their normal operating position.

Make sure that the brakes work properly before the vehicle is driven on the road.

Brakes - mechanism

    Removing and installing brake disc
    Removing and installing brake disc, brake caliper FS III Special tools and workshop equipment required Torque wrench 2-10 Nm - VAG 1783- Removing: Remove wheels. Remove the brake pads ...

    See also:

    Removing and installing fog light
    Fog lights, removing and installing, until week 45/16 Note Removal and installation are described for the left side. Removal and installation on the right side are carried out laterally reversed ...