Seat Leon >> Removing and installing speed sensor on rear axle -G44- / -G46-

SEAT Leon Service and Repair Manual / Brake system / Anti-lock brake system / Sensors / Removing and installing speed sensor on rear axle -G44- / -G46-

Removing and installing speed sensor on rear axle -G44- / -G46- , vehicles with front-wheel drive

Special tools and workshop equipment required

  • Torque wrenches - V.A.G 1410-

Anti-lock brake system

  • Lubricating paste - Electronic parts catalogue.

Removing

  • Remove electrical connector -2- from the speed sensor.
  • Unscrew bolt -1-, pull speed sensor from the torsion beam axle.

Installing

Carry out installation in the reverse sequence, noting the following:

  • Before fitting the speed sensor, the inner surface of the hole must be cleaned and lubricating paste must be applied all around it - Electronic parts catalogue .

Anti-lock brake system

Removing and installing speed sensor on rear axle -G44- / -G46- , vehicles with four-wheel drive

Special tools and workshop equipment required

  • Torque wrenches - V.A.G 1410-

Anti-lock brake system

  • Lubricating paste - Electronic parts catalogue

Removing

  • Remove electrical connector -2- from the speed sensor.
  • Unscrew bolt -1- and pull speed sensor out of wheel bearing housing.

Anti-lock brake system

Note Disregard item -3-.

Installing

Carry out installation in the reverse sequence, noting the following:

  • Before fitting the speed sensor, the inner surface of the hole must be cleaned and lubricating paste must be applied all around it - Electronic parts catalogue .
    Removing and installing speed sensors on front axle -G45- / -G47-
    Special tools and workshop equipment required Torque wrenches - V.A.G 1410- Lubricating paste - Electronic parts catalogue . Removing Remove appropriate front wheel. Remove electr ...

    Checking ABS sensor ring
    Special tools and workshop equipment required Sensor gauge - T10473- Operation process Wheel bearing unit is removed. Using sensor gauge - T10473- , check ABS sensor ring -2- all roun ...

    See also:

    Exploded view - noise insulation
    Assembly overview - short noise insulation Note During removal and installation, take note of small amounts of differences depending on the engine. - Short noise insulation - Bolt. 8 of ...