Seat Leon >> Removing and installing speed sensors on front axle -G45- / -G47-
SEAT Leon Service and Repair Manual / Brake system / Anti-lock brake system / Sensors / Removing and installing speed sensors
on front axle -G45- / -G47-
Special tools and workshop equipment required
- Torque wrenches - V.A.G 1410-
- Lubricating paste - Electronic parts catalogue .
Removing
- Remove appropriate front wheel.
- Remove electrical connector -2- from the speed sensor.
- Unscrew bolt -1- and pull speed sensor out of wheel bearing housing.
Installing
Carry out installation in the reverse sequence, noting the following:
- Before fitting the speed sensor, the inner surface of the hole must be cleaned and lubricating paste must be applied all around it - Electronic parts catalogue .
Assembly overview - speed sensor on front axle
- Speed sensor
Front right speed sensor
- G45- / rear left speed
sensor - G46-
Before installing the
speed sensor, apply lubricating
paste all
around - Electronic
parts ca ...
Removing and installing speed sensor
on rear axle -G44- / -G46-
Removing and installing speed sensor
on rear axle -G44- / -G46- , vehicles with
front-wheel drive
Special tools and workshop equipment required
Torque wrenches - V.A.G 1410-
Lubricating ...
See also:
Brief introduction
Introduction
Statistics show that children are generally safer on the rear
seat than on the front passenger seat.
We recommend that children under 12 years of age be transported on the rear
seats. ...
