Fitting control unit to hydraulic unit

Special tools and workshop equipment required Torque screwdriver - VAG 1624- ESD workplace - VAS 6613- Torx socket T25 Clean sealing surface on hydraulic unit -2- using pla ...

Assembly overview - speed sensor on front axle

- Speed sensor Front right speed sensor - G45- / rear left speed sensor - G46- Before installing the speed sensor, apply lubricating paste all around - Electronic parts ca ...

See also:

1.2l and 1.4I TSI engines
Removing Loosen hose clips -1- and -2- and remove air hose. Only engines with code CZEA Disconnect connectors -2-, and pull off air hose -1-. Continue for all engines Unplug elec ...