Seat Leon >> Connecting vehicle diagnosis and service information system

SEAT Leon Service and Repair Manual / Maintenance / Description of work / Connecting vehicle diagnosis and service information system

Special tools and workshop equipment required

  • Vehicle diagnosis tester

NOTICE It must be ensured that the selected vehicle diagnostic and service information system is only used with the associated diagnostic cable.

CAUTION
  • Always secure testing and measuring equipment on the rear seat during a road test.
  • While the vehicle is moving this equipment must be operated by a second person; NOT by the driver.

Work sequence

  • Apply handbrake.
  • Automatic gearbox: set the selector lever in the position "P" or "N".
  • Manual gearbox: gear lever at neutral.
  • If the ignition is switched off connect the vehicle diagnostic and service information system .
  • Switch on the ignition.

Now follow instructions on screen in order to start desired functions.

Maintenance

    Tyre pressure control system: carry out basic adjustments
    NOTICE The basic adjustment of the tyre control indicator should only be carried out after correcting the inflation pressure values of the tyres. If no pressure loss and tyre damage are found af ...

    Error memory on all systems: interrogating
    Special tools and workshop equipment required Vehicle diagnosis tester Work sequence NOTICE If no indications are displayed on the screen during these operations. ODIS Service Connecting ...

    See also:

    Removing and installing brake calliper piston
    Special tools and workshop equipment required Wedge - 3409- Thrust piece - T10145- Note When carrying out repairs, install all parts supplied in repair kit. Use only methylate ...