Seat Leon >> Remove and install control unit for stabilising the transmission and reception quality - R308-
Remove and install control unit for stabilising the transmission and reception quality - R308- , León / León SC
removing
- Switch off ignition and all electrical equipment.
Vehicles without access and start authorisation system
- Remove ignition key, if fitted.
Vehicles with access and start authorisation system
- Store ignition key outside the vehicle to prevent the ignition from being switched on unintentionally.
Continued for all vehicles
- Remove right C-pillar cover.
- Release and pull off connector -1-.
- Remove and install control unit for stabilising the transmission and reception quality - R308- -4- from its bracket -2-.
Installing
Installation is carried out in reverse order.
Specified torques
Remove and install control unit for stabilising the transmission and reception quality - R308- , León ST
removing
- Switch off ignition and all electrical equipment.
Vehicles without access and start authorisation system
- Remove ignition key, if fitted.
Vehicles with access and start authorisation system
- Store ignition key outside the vehicle to prevent the ignition from being switched on unintentionally.
Continued for all vehicles
- Remove right D-pillar cover.
- Release and pull off connector -3-.
- Remove and install control unit for stabilising the transmission and reception quality - R308- -2- from its bracket -1-.
Installing
Installation is carried out in reverse order.
Removing and installing telephone microphone - R38-
Telephone microphone - R38- : Removal and installation, vehicles without antitheft alarm system removing Switch off ignition and all electrical equipment. Vehicles without access and start a ...Navigation system
Overview - navigation system - GPS aerial - R50- in the centre of the dash panel - Display unit for front information display and operating unit control unit - J685- in the centre of the dash ...See also:
Removing and installing sliding sunroof frame
Special tools and workshop
equipment required
Electric cutter - SAT
1561A-
Knife 207 - SAT 1561/12-
Pull handle - VAG 1351/1-
(x2)
Dual component window
sealant - VAS 5237-
Mater ...