Seat Leon >> Lights in exterior mirror

Assembly overview - lights in exterior mirror

  1. - Mirror mounting
    • Installing and removing
  2. - Turn signal light bulb
    • Driver side exterior mirror turn signal bulb - L131-
    • Front passenger side exterior mirror turn signal bulb - L132-
    • Removal and installation
  3. - Bolts
    • 0.9 Nm
  4. - Cover for mirror
    • Installing and removing
  5. - Mirror glass
    • Installing and removing

Installing and removing the exterior mirror turn signal bulb L131 / L132

Removing

  • Switch off ignition and all electrical consumers.

Vehicles without access and start authorisation system

  • Remove ignition key, if fitted.

Vehicles with access and start authorisation system

  • Store the ignition key outside the vehicle to prevent the ignition from being switched on unintentionally.

Continued for all vehicles

  • Remove mirror cover.
  • Unplug the electrical connector -2-.
  • Unscrew bolts -arrows-.
  • Remove the bulb for the indicator -1- upwards out of the mount -3- in the exterior mirror actuator.

Installing

Installation is carried out in the reverse sequence; note the following:

Lights, bulbs, switches - exterior

Note Entire turn signal in exterior mirror must be renewed as a complete unit if an LED is defective.

    Removing and installing fog light bulb L22 / L23
    Removing and installing fog light bulb L22 / L23 Note Do not touch the halogen bulb glass when installing it. The lamp holder is part of the halogen lamp. Removing Disconnect ignition a ...

    See also:

    Removing and installing coolant pipes on heat exchanger
    Removing and installing coolant pipes at heat exchanger (Valeo) Note There are different designs and makes of heater and air conditioning unit. The individual components of the various heaters and ...