Sunroof light

Fig. 178 Removing sunroof light Fig. 179 Removing sunroof light – Carefully remove the lamp, using the flat side of the screwdriver, as shown in the figure  fig. 179. – Remove the l ...

Jump leads

The jump lead must have a sufficient wire cross section. If the engine fails to start because of a discharged battery, the battery can be connected to the battery of another vehicle to start the e ...

See also:

Removing and installing clutch position sender - G476-
Removing Push driver's seat as far back as possible. If fitted, remove footwell cover on driver side . Unplug electrical connector -arrow- at clutch position sender - G476- . Unclip ...