Seat Leon >> Synchronising the remote control key

Synchronising the remote control key
– Use both keys that have been delivered with the vehicle  fig. 62, the key fitted with the remote control A and the normal key B.
– Unlock the vehicle from the driver side door using the key without the remote.
– Turn the ignition ON using the key without the remote control.
– Lock the vehicle using the driver side door lock with the remote control key  fig. 63.
– In a time of maximum 30 seconds the following operations must be carried out: – Operate the button locking on the remote control, the once for locking on the remote control, the indicators will flash.
– Operate the button unlocking on the remote control once for unlocking on the remote control for more than 2 seconds.
– The key will have been programmed and the vehicle will unlock, confirming at the same time the synchronisation.

It is possible that the vehicle could no longer be opened and closed with the remote control if the button repeatedly pressed outside of the effective is repeatedly pressed outside of the effective range of the radio frequency remote control. The remote control key will have to be resynchronised.

Spare remote control keys are available from Authorised Service Centres, they must be matched to the locking system.

Up to eight remote control keys can be used.

    Changing the battery
    If the battery indicator does not flash when the buttons are pushed, the battery must be replaced. Caution Use of inappropriate batteries may damage the radio frequency remote control. For this re ...

    See also:

    Removing and installing sill panel trim
    Removing and installing side member trim, X-PERIENCE version Special tools and workshop equipment required Release lever - 3409- Adhesive strip remover - VAS 6349- Torque wrench ...